Heat pump
Compressor
Agains coil
corrosion
Full Inverter
Chauffe / Refroidit
Compatible traitement au sel
La + silencieuse et économique
Heat pump
Compressor
Agains coil
corrosion
Full Inverter technology on a swimming pool heat pump offers a host of benefits. Thanks to its soft start, it is much more energy-efficient, noise pressure is significantly reduced and its lifetime is greatly increased.
Nowadays, choosing a heat pump also means making an aesthetic choice. The Jetline Premium Fi proudly displays its trendy features by the pool. Its thermocoated aluminium face combines elegance and high performance to provide a heat pump easy to handle on a daily basis.
The new control panel with wired extension at 10 meters features the Eco Inverter and Power Inverter operating modes. When you start heating your pool, the Boost Inverter mode increases the heat pump's performance to reach the set temperature as quickly as possible. When the set point is reached, your pool heat pump operates in Eco mode.
With the built-in WiFi module, you can control your pool heat pump remotely from your smartphone.
A little extra that makes life easier: integrated LEDs on the front panel let you know at a glance the current operating status:
Green :temperature set point has been reached.
Blue:your pool is being heated.
Red:the heat pump is out of service.
The Jetline Premium Fi retains all the features that have made it such a success: its automatic defrosting and titanium Twisted Tech heat exchanger mean it can operate at temperatures as low as -15°C. Not forgetting its reversible mode: you can not only heat the pool water, but also cool it during particularly hot months.
Popular in the domestic heating and air conditioning sectors, Full Inverter technology adjusts precisely the fan and the compressor, turning the heat pump into a smart pump.
The compressor starts up gradually. An automatic regulator boosts the heat pump's capacity for a rapid rise in temperature when the set temperature is far from the pool temperature. During the season, to maintain the set temperature, the heat pump operates at reduced power.
The Full Inverter heat pump therefore operates more stably. The compressor avoids sudden starts and stops. All this for energy savings of over 35% compared with an ON/OFF pool heat pump.
With its aluminium front panel, the Jetline Premium Fi heat pump blends seamlessly into the exterior décor.
In addition to the elegance it brings to the heat pump, this material, which is more flexible than steel, is particularly resistant to bad weather and reduces its noise level even further
Because a heat pump, regardless of its capacity, must be as easy to use, Poolex equips all its heat pumps with the WIFI functionnality. All information displayed on the control panel is also available on your smartphone.
The LEDs integrated into the front of the heat pump give it a colourful look, while providing a highly useful technical feature: instant display of the pump's operating status.
Green :temperature set point has been reached.
Blue:your pool is being heated.
Red:the heat pump is out of service.
Model | Jetline Premium Fi 55 | Jetline Premium Fi 75 | Jetline Premium Fi 95 | Jetline Premium Fi 125 | Jetline Premium Fi 155 | Jetline Premium Fi 155 tri | Jetline Premium Fi 210 | Jetline Premium Fi 210 tri | |
---|---|---|---|---|---|---|---|---|---|
Pool volume (m3) | From 30 to 45 | From 40 to 55 | From 50 to 70 | From 65 to 90 | From 80 to 115 | From 80 to 115 | From 110 to 145 | From 110 to 145 | |
Condition: Air 26°C Water 26°C Hygro 80% |
Max. output power (kW) | 7.62 | 10.21 | 13.12 | 16.52 | 21.01 | 21.43 | 28.23 | 28.42 |
Min. output power (kW) | 1.75 | 2.34 | 3.02 | 3.79 | 4.83 | 4.98 | 6.49 | 6.53 | |
Power consumption (kW) | 1.10~0.13 | 1.47~0.17 | 1.88~0.22 | 2.38~0.28 | 3.03~0.36 | 3.08~0.37 | 4.06~0.48 | 4.08~0.48 | |
COP | 13.52~6.91 | 13.54~6.93 | 13.61~6.98 | 13.57~6.95 | 13.56~6.94 | 13.58~6.96 | 13.57~6.95 | 13.59~6.96 | |
Condition*: Air 15°C Water 26°C Hygro 70% |
Max. output power (kW) | 5.74 | 7.62 | 9.73 | 12.61 | 15.74 | 15.96 | 20.68 | 20.75 |
Min. output power (kW) | 1.33 | 1.76 | 2.23 | 2.87 | 3.59 | 3.66 | 4.77 | 4.79 | |
Power consumption (kW) | 1.16~0.18 | 1.54~0.23 | 1.95~0.29 | 2.54~0.38 | 3.18~0.47 | 3.20~0.48 | 4.17~0.63 | 4.18~0.63 | |
COP | 7.53~4.94 | 7.58~4.95 | 7.63~4.98 | 7.61~4.96 | 7.57~4.95 | 7.60~4.98 | 7.59~4.96 | 7.59~4.97 | |
Power supply | Mono 230 V / 50 Hz | Three phase 380/415V | Mono 230 V / 50 Hz | Three phase 380/415V | |||||
Heating temperature range | 15°C~ 40°C | ||||||||
Operating range | -15°C~ 43°C | ||||||||
Max. power (kW) | 2.05 | 2.85 | 3.66 | 3.93 | 4.99 | 4.55 | 5.96 | 5.96 | |
Flow (3/h) | 2.5 | 3.5 | 4.5 | 5.5 | 6.5 | 6.1 | 9 | 9 | |
Refrigerant | R32 | ||||||||
Packaging dimensions (mm) | 930x425x710 | 990x445x760 | 1146x460x862 | ||||||
Dimensions (mm) | 864x364x592 | 925x388x642 | 1084x413x736 | 1,060x485x736 | |||||
Net/gross weight (kg) | 49 / 59 | 52 / 62 | 55 / 65 | 58 / 68 | 63 / 73 | 79 / 92 | |||
Noise at 1 m (db(A)) | <38~<47 | <39~<47 | <40~<49 | <41~<49 | <41~<50 | <42~<51 | |||
Noise at 10 m (db(A)) | <20~<28 | <20~28 | <21~<30 | <22~<31 | <23~<31 | <24~33 | |||
Compressor type | Twin rotary | ||||||||
Compressor brand | Mitsubishi | ||||||||
Heat exchanger | Twisted Tech©Titanium | ||||||||
Operation | Eco & Boost Inverter / Heating / Cooling | ||||||||
Load loss (mCE) | 0.9 | 1 | 1.1 | 1.2 |
Maintenance kit including multi-language user anual.
Anti-vibration support kit
50mm 1”1/2 PVC connectors
Extension for wired control (10m)
Condensate discharge pipe
Isothermal cover for storage over winter
Delivered on wooden pallets