Accessories

pH Pump

Water pH Regulation

pH minus | Setpoint Programming | For pools up to 65m3

Warranties

2years

Store locator

Download the product sheet

Download the user manuals

Key Features

For Proper pH Level Maintenance in Your Pool

The ideal solution for stabilizing the pH level in your pool

You've decided to switch to automatic pool treatment and install a salt chlorinator. But will your pool water always be healthy and clear? The answer is simple: you must also ensure water balance before disinfection, throughout the life of the pool. Indeed, the dosage of disinfectant primarily depends on a good pH level. With a peristaltic pump, this level is automatically controlled.

The Poolex pH Pump is recommended for installations with a salt chlorinator that tends to raise the pool water's pH. The pH Pump measures this level and regulates the dosage of pH minus to ensure continuous balance.

Suitable for pH minus product dosing
Easy setpoint programming
Semi-automatic calibration of a single neutral pH value
Reinforced polypropylene casing
Polycarbonate front panel
IP 55 protection

Stable pH Level for Crystal-Clear Water

What's more inviting than a pool with crystal-clear water, with the sun reflecting freely at the bottom of the pool?

The secret is the pH level. Before any treatment, make sure the pH of your pool water is between 7.2 and 7.4. If not, any treatment with salt, bromine, or chlorine is simply ineffective.

Balancing your pool water's pH level is done gradually. That's why Poolex's automatic peristaltic pump makes your life easier!

Installation

The pH pump must be installed on the pool's hydraulic circuit. The pH probe and the injection system should be positioned before the chlorinator. Place the pH measurement probe close to a ground connection.

Did You Know?

pH indicates the water's balance (acidic/alkaline). This level should be between 7.0 and 7.4 for stable water in all circumstances: weather conditions, seasonality, increased usage, etc.